Skip to content
Guides

Steel weight calculation: plate, bar, pipe and tube

How to calculate the weight of steel plate, round bar, pipe and hollow section from size and length, with the d²/162 rule, density factors for stainless and aluminium, and a worked 970 kg material list.

By Site AdministratorUpdated 8 min read

Steel is bought, transported, lifted and often priced by the kilogram, yet drawings give only sizes and lengths. A steel weight calculation bridges that gap: it turns plate thicknesses, bar diameters, pipe sizes and box sections into kilograms per metre, then into the weight of each piece and the whole order. This guide gives the formulas for the common shapes, explains where the familiar shortcuts such as d²/162 come from, shows how to correct for stainless steel and other metals, and works through a complete material list for a small machine frame.

Cross-sections of steel plate, round bar, pipe and square hollow section with their weight formulas: 7.85 × t kg/m², d²/162 kg/m, 0.02466 (D − t) t kg/m and 2t(B + H − 2t) mm²

Steel weight calculation: the one formula behind every table

Every weight chart for plate, bar, pipe or section comes from the same relationship: weight equals volume times density.

W = A × L × ρ

  • W = weight (mass), kg
  • A = cross-sectional area, m² (1 mm² = 10⁻⁶ m²)
  • L = length, m
  • ρ = density, 7,850 kg/m³ for carbon (mild) steel

Because sizes are normally given in millimetres, it is easier to work per metre of length. One square millimetre of steel section, one metre long, has a volume of 10⁻⁶ m³ and weighs 7,850 × 10⁻⁶ = 0.00785 kg. That gives the most useful number in this article:

W (kg/m) = A (mm²) × 0.00785

Find the cross-section area in mm², multiply by 0.00785, and you have kilograms per metre. Multiply by the length for the weight of a piece, and by the number of pieces for the total. All the shape formulas below are this rule with the area worked out in advance.

Steel plate and sheet weight

For a plate, the useful figure is weight per square metre. A plate 1 m × 1 m with thickness t (mm) has a volume of t × 10⁻³ m³, so:

Plate weight (kg/m²) = 7.85 × t

A 10 mm plate weighs 78.5 kg/m², a 6 mm plate 47.1 kg/m² and a 3 mm sheet 23.55 kg/m². For a whole plate, multiply by its area:

Plate weight (kg) = length (m) × width (m) × t (mm) × 7.85

A 2,000 × 1,000 × 10 mm plate is 2 m² × 78.5 = 157 kg. Flat bar is simply a narrow plate, so its weight per metre is width × thickness × 0.00785: a 50 × 10 mm flat weighs 500 × 0.00785 = 3.925 kg/m.

In imperial units, steel plate weighs about 40.8 lb per square foot for each inch of thickness, so a 1/4 in plate is roughly 10.2 lb/ft².

Round, square and hexagon bar

Round bar and the d²/162 rule

A round bar of diameter d (mm) has an area of π d² / 4. Multiplying by 0.00785:

Round bar (kg/m) = π / 4 × d² × 0.00785 = 0.006165 × d² ≈ d² / 162

This is where the well-known site rule d²/162 for reinforcing bars comes from: 1 / 0.006165 = 162.2. A 12 mm bar weighs 144 / 162 = 0.889 kg/m, and a 50 mm bar 2,500 × 0.006165 = 15.41 kg/m. The rounding to 162 changes the result by about 0.1%, which is far smaller than the rolling tolerance of the bar.

In imperial units a round steel bar weighs 2.67 × d² lb/ft, with d in inches.

Square and hexagon bar

  • Square bar of side a: kg/m = a² × 0.00785 (a 25 mm square is 4.91 kg/m)
  • Hexagon bar, s across the flats: area = 0.866 × s², so kg/m = 0.0068 × s² (a 30 mm hexagon is 6.12 kg/m)

Steel pipe weight per metre

A pipe is a ring between the outside diameter D and the inside diameter D − 2t. Its area simplifies neatly to π × (D − t) × t, so:

Pipe (kg/m) = 0.02466 × (D − t) × t

with D and t in mm. The constant is π × 0.00785. Always use the actual outside diameter, not the nominal pipe size: a 4 in (DN 100) pipe has an outside diameter of 114.3 mm whatever its schedule, and only the wall changes. For 4 in Schedule 40 the wall is 6.02 mm:

W = 0.02466 × (114.3 − 6.02) × 6.02 = 16.08 kg/m

Pipe tables to ASME B36.10 list 16.07 kg/m for plain-end 4 in Schedule 40, so the formula matches the table to within rounding. The imperial version is 10.69 × (D − t) × t lb/ft with D and t in inches. Remember that pipe standards allow the wall to be thinner than nominal (for seamless pipe, commonly up to 12.5% under), so a delivered pipe can weigh a little less than the table.

Square and rectangular hollow sections

For a box section B × H with wall t, the simple sharp-corner area is:

A ≈ 2t (B + H − 2t)

For a 100 × 100 × 5 mm square hollow section that is 2 × 5 × 190 = 1,900 mm², or 14.9 kg/m. Real sections have rounded corners, which remove a little steel. Cold-formed sections (EN 10219) have larger corner radii than hot-finished ones (EN 10210), so their tabulated weights are lower: 14.4 kg/m cold-formed and 14.7 kg/m hot-finished for 100 × 100 × 5. If you want to include the corners, subtract (4 − π) × (ro² − ri²) from the area, where ro and ri are the outer and inner corner radii.

The sharp-corner formula is therefore about 1–4% heavy. That is a safe side for crane and transport loads, but for purchasing and pricing use the section table or the supplier's catalogue.

Beams, channels and angles

Rolled sections such as I-beams, H-beams, channels and angles have tapered flanges and root radii, so do not calculate them from their outline dimensions. Their weight per metre is printed in the section tables of the relevant standard, and in many designations it is part of the name: an American W8×31 beam weighs 31 lb/ft. Take the kg/m figure from the table and multiply by length, exactly as for any other shape.

Stainless steel, aluminium and other metals

The same formulas work for any metal; only the density changes. The easiest way is to calculate the weight as mild steel and multiply by a factor:

Material
Density, kg/m³
Factor vs mild steel
Mild / carbon steel
7,850
1.00
Stainless steel 304
7,930
1.01
Stainless steel 316
8,000
1.02
Cast iron (typical)
7,200
0.92
Brass (typical)
8,500
1.08
Copper
8,960
1.14
Aluminium
2,700
0.34

So a 3 mm stainless 304 sheet weighs 3 × 7.93 = 23.79 kg/m² instead of 23.55 kg/m² for mild steel. The difference is only 1–2%, but on a large order it is real money. Aluminium is about a third of the weight of steel for the same size.

Worked example: material list for a machine frame

Here is a complete steel weight calculation for a real job. A fabricator is pricing a skid-mounted machine frame and needs the total steel weight for purchasing and for planning the lift. The material list is:

  • Base plates: 2 plates, 2,000 × 1,000 × 10 mm, mild steel
  • Frame: 24 m of 100 × 100 × 5 mm square hollow section (cold-formed)
  • Header pipe: 6 m of 4 in Schedule 40 pipe (114.3 × 6.02 mm)
  • Shafts and pins: 6 m of 50 mm round bar
  • Stiffeners: 12 m of 50 × 10 mm flat bar
  • Drip tray: 1 sheet, 2,500 × 1,250 × 3 mm, stainless steel 304

Step-by-step weights

  • Plates: 7.85 × 10 = 78.5 kg/m² → 2 m² × 78.5 = 157.0 kg each → 314.0 kg
  • Hollow section: table weight 14.4 kg/m (sharp-corner formula 14.9) → 24 × 14.4 = 345.6 kg
  • Pipe: 0.02466 × 108.28 × 6.02 = 16.08 kg/m (table: 16.07) → 6 × 16.07 = 96.4 kg
  • Round bar: 0.006165 × 50² = 15.41 kg/m → 6 × 15.41 = 92.5 kg
  • Flat bar: 500 × 0.00785 = 3.925 kg/m → 12 × 3.925 = 47.1 kg
  • Stainless sheet: 3 × 7.93 = 23.79 kg/m² → 3.125 m² × 23.79 = 74.3 kg
Item
kg/m or kg/m²
Quantity
Weight, kg
Plate 10 mm
78.5 kg/m²
4.0 m²
314.0
SHS 100 × 100 × 5
14.4 kg/m
24 m
345.6
Pipe 4 in Sch 40
16.07 kg/m
6 m
96.4
Round bar 50 mm
15.41 kg/m
6 m
92.5
Flat bar 50 × 10
3.925 kg/m
12 m
47.1
SS304 sheet 3 mm
23.79 kg/m²
3.125 m²
74.3
Total


969.9

Bar chart of the machine frame material list: plates 314.0 kg, square hollow section 345.6 kg, pipe 96.4 kg, round bar 92.5 kg, flat bar 47.1 kg and stainless sheet 74.3 kg, total about 970 kg

The frame needs about 970 kg of steel (2,138 lb), of which 74 kg is stainless. Had the hollow section been calculated with the sharp-corner formula, the total would have come out 12 kg higher, which is harmless for a lifting plan but would overstate the purchase. For the lift itself, add the weight of welds, bolts, paint and any equipment mounted on the skid before choosing slings and a crane.

Why real steel weighs a little more or less

  • Rolling tolerances. Plates, bars and sections are rolled within tolerance bands on thickness and size, so a delivered piece can be a few percent heavy or light. Some mills and markets sell on actual weighed weight, others on theoretical weight; check which one your price is based on.
  • Coatings. Galvanising and thick paint systems add weight, noticeably so on thin sections.
  • Grade and alloy. The density of alloy and stainless steels differs slightly from the standard figure; use the value from the material data sheet when it matters.
  • Cutting waste. The weight on the drawing is the finished weight. Plates are bought as whole sheets and bars as stock lengths, so the purchased weight includes offcuts. Nesting the parts on standard sheets, as described in our guide on how many MS or SS sheets a tank really needs, gives the true buy quantity.

Quick reference formulas

  • General: kg/m = area (mm²) × 0.00785
  • Plate: kg/m² = 7.85 × t (mm); imperial 40.8 lb/ft² per inch
  • Round bar: kg/m = d² / 162 (exactly 0.006165 × d²); imperial 2.67 d² lb/ft
  • Square bar: kg/m = a² × 0.00785
  • Hexagon bar: kg/m = 0.0068 × s² (across flats)
  • Pipe: kg/m = 0.02466 × (D − t) × t; imperial 10.69 (D − t) t lb/ft
  • Box section: area ≈ 2t (B + H − 2t), minus corner radii
  • Other metals: multiply the mild steel weight by ρ / 7,850

To skip the arithmetic, use the steel weight calculator: choose plate, round, square or hexagon bar, pipe or tube and the material, and it gives the weight per metre, per piece and in total. For tank shells and sheet counts, the MS and SS plate calculator works out the plates to buy and their weight, and the unit converter handles kilograms, pounds, millimetres and inches. When you send a steel list out for pricing, give sizes, grades, lengths and quantities clearly, as explained in how to prepare a machinery quotation request.

#steel weight#pipe weight#stainless steel#plate weight#hollow section#steel weight calculation#round bar weight

Keep reading