Runs in your browser
Steel weight calculator
Choose the shape and the material, then enter the size and the length. The calculator returns the weight per metre, the weight of each piece and the total weight for the number of pieces, and for plate the weight per square metre.
Your figures
Plate or flat: width. Round: diameter. Square: side. Hexagon: across the flats. Pipe: outside diameter. Tube: one side.
Only for a rectangular tube: the other side. Ignored for every other shape.
Plate, flat bar, pipe and tube only. Ignored for solid bar.
Result
Weight
- Weight per metre
- 15.413 kg/m
- Weight per piece
- 92.48 kg
- Total weight
- 92.5 kg · 0.092 t
- Total length
- 6 m
19.63 cm² cross-section at 7,850 kg/m³
6 m long
1 piece
Nominal sizes and a standard density. A mill's rolling tolerance, a galvanised coat or a different alloy shifts the real weight by a few percent — weigh a sample when it matters.
Questions
How is the weight of a bar or pipe calculated?
Weight is volume times density. The calculator finds the cross-section area of the shape, multiplies it by the length for the volume, and then by the density of the material. For steel the density used is 7,850 kg per cubic metre. A 50 mm round steel bar comes to about 15.4 kg per metre.
What do Size A, Size B and the thickness mean for each shape?
For plate and flat bar, A is the width and the thickness is the thickness. For round bar, A is the diameter; for square bar, the side; for hexagon bar, the distance across the flats. For round pipe, A is the outside diameter and the thickness is the wall. For a rectangular tube, A and B are the two sides and the thickness is the wall.
Is the result exact?
It is the nominal weight for the size you entered. Mills roll within a tolerance, so a delivered bar can be a few percent heavy or light, and the real density of an alloy differs a little from the standard figure. Galvanising adds weight too. For billing or lifting limits, weigh a sample.
Why is stainless steel heavier than mild steel?
Stainless steel is denser: about 8,000 kg per cubic metre for 304 and 316 grades, against 7,850 for mild steel. The difference is small, about two percent, but it matters on a large order. Aluminium is about a third of the weight of steel for the same size.