Skip to content
Guides

Roller flour mill machinery from daily wheat tonnage

How the Flour mill tool turns wheat tonnage, operating hours and extraction into roller stands, sifters, purifiers, silos, bins and packing lines.

By Site AdministratorUpdated 4 min read

A roller flour mill is quoted by how much wheat it grinds a day, but the machine list behind that figure is long: cleaning, tempering, rolls, sifters, purifiers, pneumatics, silos and packing. The Flour mill tool takes five figures and lists every line with a size, a quantity and the reason for it. You then enter your own rate against each line.

How the calculation works

The starting values are 150 tonnes of wheat a day, 24 operating hours, 76% extraction, 20 days of wheat storage and 3 days of flour storage. The wheat figure means clean wheat to the first break, not wheat received. The tool first works out:

  • Milling rate (kg/h) = wheat × 1000 ÷ hours.
  • Flour per day = wheat × 1000 × extraction %. The balance is bran and shorts.
  • Roll length (mm) = wheat × 11 × (24 ÷ hours). Stands = roll length ÷ 2000, rounded up, never fewer than 2, because a double stand carries two 1000 mm rolls.

The other lines follow simple rules:

  • Plansifters: one per 100 tonnes a day, rounded up. Purifiers: one per 60 tonnes a day, rounded up, minimum 2, each sized at a quarter of the milling rate.
  • Fixed counts: 2 scourers, 2 bran finishers, 2 bag filters and 2 packing lines. The intake runs at twice the milling rate.
  • Tempering holds 24 hours of wheat at 780 kg/m³ in 3 bins. Wheat silos hold the storage days at 780 kg/m³ over 2 silos. Flour bins hold the storage days at 550 kg/m³ over 4 bins. Each volume is rounded up to a stock size.

A worked example

Take the starting values.

  • Milling rate = 150,000 ÷ 24 = 6,250 kg/h, so the intake is 12,500 kg/h.
  • Flour = 150,000 × 0.76 = 114,000 kg a day. Bran and shorts = 36,000 kg a day, or 1,500 kg/h.
  • Roll length = 150 × 11 × 1 = 1,650 mm. That is 0.83 of a stand, so the minimum of 2 stands applies.
  • Plansifters = 150 ÷ 100 = 1.5, so 2. Purifiers = 150 ÷ 60 = 2.5, so 3, each 1,563 kg/h.
  • Tempering = 150,000 kg ÷ 780 = 192.3 m³, shown as 200 m³ with a quantity of 3.
  • Wheat silos = 150,000 × 20 ÷ 2 = 1,500,000 kg each, which is 1,923 m³, shown as 2,000 m³ for each of 2 silos.
  • Flour bins = 114,000 × 3 ÷ 4 = 85,500 kg each, which is 155.5 m³, shown as 200 m³ for each of 4 bins.
  • Each packing line is sized at 114,000 ÷ 24 = 4,750 kg/h.

Now shorten the day to 8 hours. The milling rate rises to 18,750 kg/h, the roll length becomes 150 × 11 × 3 = 4,950 mm, and 4,950 ÷ 2000 = 2.48 rounds up to 3 stands.

Reading the result

Roll length is the line that matters most. It depends on tonnage and hours only, so raising or lowering extraction never changes the number of roller stands. Extraction moves flour between the bran side and the flour side: more flour means larger bins and packing lines and less bran. Fewer operating hours raise every kg/h figure at once, which is why a mill on one shift needs far more roll than one running round the clock. The basis column on each line shows the rule behind its size.

What the tool assumes and leaves out

  • It prices nothing. You supply the rate for each line and no market prices are built in.
  • The 11 mm of roll per tonne, the 2000 mm per stand and the divisors for sifters and purifiers are fixed. A different flow sheet may need other numbers.
  • The tempering size is worked out from a full 24 hours of wheat. Read the basis text before you price it, because it is not divided by the three bins.
  • Pneumatic conveying and aspiration are one line. In a real mill they are a large item, so check that your rate covers fans, cyclones, airlocks and ducting.
  • Not in the list: the building, the electrical substation and motor control centre, the flour laboratory, bulk truck loading, blending or fortification equipment, and silo foundations.

Common mistakes

  • Entering wheat received instead of clean wheat to the first break.
  • Changing hours to a shift pattern and forgetting that the stand count and all kg/h sizes change with it.
  • Expecting a lower extraction to reduce the roller stands.
  • Typing a storage period in weeks when the field is in days.
  • Reading a silo size such as 2,000 m³ as a mistake. Twenty days of wheat at 150 tonnes a day is large; shorten the storage days if that is not what you plan to hold.

Try your own figures in the Flour mill calculator. To check the drive on a stand, use the motor and gearbox selection calculator.

Keep reading