Rice mill machinery from daily paddy tonnage
How the Rice mill tool turns paddy tonnage, hours and head rice yield into huskers, whiteners, graders, a colour sorter, silos and packing lines.
A paddy rice mill is described by the paddy it takes in each day, but the plant behind that number has many stages: cleaning, husking, separation, whitening, polishing, grading, sorting and packing. The Rice mill tool takes five figures and lists each machine with a size, a quantity and the reason for it. You then enter your own rate against each line.
How the calculation works
The starting values are 100 tonnes of paddy a day, 20 operating hours, 62% head rice yield, 15 days of paddy storage and 320 colour sorter channels. The tool first works out:
- Paddy rate (kg/h) = paddy × 1000 ÷ hours.
- Head rice rate = paddy rate × head rice %. This sizes the whitening, grading and packing side.
- Husk = 22% of the paddy rate and bran = 8% of the paddy rate.
The lines then follow these rules:
- Pre-cleaner at 1.5 times the paddy rate. Destoner at the paddy rate.
- Rubber roll huskers: one per 4,000 kg/h, rounded up. Paddy separators: one per 3,000 kg/h, rounded up.
- Three whiteners and one mist polisher, sized on the head rice rate. Two length graders and two packing lines on the same rate.
- Paddy silos hold the storage days at 580 kg/m³, split over 3 silos, each rounded up to a stock size.
- The colour sorter is sized from the channels you type, not from the paddy.
A worked example
Take the starting values.
- Paddy rate = 100,000 ÷ 20 = 5,000 kg/h. The pre-cleaner is 7,500 kg/h and the destoner 5,000 kg/h.
- Huskers = 5,000 ÷ 4,000 = 1.25, so 2. Separators = 5,000 ÷ 3,000 = 1.67, so 2.
- Husk = 5,000 × 0.22 = 1,100 kg/h. Bran = 5,000 × 0.08 = 400 kg/h.
- Head rice rate = 5,000 × 0.62 = 3,100 kg/h. Each of the 3 whiteners, the polisher, the 2 graders and each of the 2 packing lines is listed at 3,100 kg/h.
- Paddy silos = 100,000 × 15 ÷ 3 = 500,000 kg each, which is 862 m³, shown as 1,000 m³ for each of 3 silos.
- Colour sorter = 320 channels, as typed. The tool's own guide of 64 channels per tonne an hour gives 5 × 64 = 320 for this plant.
Now run the plant for 10 hours instead of 20. The paddy rate doubles to 10,000 kg/h. Huskers become 10,000 ÷ 4,000 = 2.5, so 3, and separators 10,000 ÷ 3,000 = 3.33, so 4. The colour sorter does not change unless you change the channels yourself.
Reading the result
Hours of operation drive the machine counts, because the machines are sized in kg/h. Head rice yield does not change the huskers or separators, which work on paddy; it changes the whitening, grading and packing lines, and it changes nothing about the husk and bran flows, which are fixed shares of the paddy. A higher yield assumption makes the back end larger, so enter the yield you expect from your variety and not the best figure you have seen. The basis text on each line states the rule behind its size.
What the tool assumes and leaves out
- It prices nothing. You supply the rate for each line and no market prices are built in.
- Husk at 22% and bran at 8% of paddy, 4 tonnes an hour per husker and 3 tonnes an hour per separator are fixed. Machines of other makes may differ.
- The colour sorter is an input. If you change the tonnage, change the channels as well.
- The whitener count is fixed at three and the polisher at one.
- Not in the list: parboiling, the dryer, the boiler and steam system, the building, and bulk storage beyond the paddy silos. A parboiling section is a project of its own.
- Husk handling is only an aspirator and conveying line. The tool does not size a boiler to burn it. Bran goes to a bagging set; the Solvent extraction plant calculator covers extracting oil from it.
Common mistakes
- Entering paddy at the head rice figure, or the other way round. The tonnage field is paddy in.
- Changing the tonnage and leaving the colour sorter at 320 channels.
- Expecting a higher head rice yield to need more huskers.
- Entering 24 hours for a plant that really runs two shifts, which makes every machine too small.
- Treating the rounded silo size as a recommendation. It is a stock size above the calculated volume.
Try your own figures in the Rice mill calculator. For the drive on a husker or whitener, use the motor and gearbox selection calculator.