The origins of the metric system and SI
How a revolution-era French idea became the common language of engineering: the first metre, the Metre Convention, the birth of SI and why mixed units still cause trouble.
Almost every machinery datasheet today uses metres, kilograms, seconds and their relatives. That was not always so. Before the metric system, measures differed from region to region and sometimes from town to town, and trade, engineering and tax collection all suffered. The story of how one decimal system came about explains why it is now the common language of engineering.
Before the metric system
Across Europe and in many other parts of the world, units such as feet, ells, pounds and measures of grain varied by place and by trade. In 18th-century France there were a very large number of local units. South Asia had the same problem: a seer or a maund could mean different weights in different markets. Merchants, builders and tax officials all had reason to want one uniform standard.
France and the first metre
In the 1790s, during the French Revolution, the French Academy of Sciences was asked to design a system based on nature and on decimal multiples. The metre was defined in 1791 as one ten-millionth of the distance from the North Pole to the equator along the meridian through Paris. Two astronomers, Jean-Baptiste Delambre and Pierre Méchain, surveyed part of that meridian between Dunkirk and Barcelona, starting in 1792, to fix its length.
The unit of mass, the kilogram, was linked to the mass of a cubic decimetre of water, which is one litre. In 1799 platinum standards of the metre and the kilogram were deposited in the French archives.
Spreading and international agreement
The metric system spread slowly through the 19th century, first in France and its neighbours and then in many other countries, helped by railways, industry and trade. In 1875 seventeen nations signed the Metre Convention in Paris, which set up the International Bureau of Weights and Measures. In 1889 the first General Conference on Weights and Measures approved international prototypes of the metre and the kilogram, made of platinum-iridium alloy. India moved to metric weights and measures in stages from the late 1950s.
From metric to SI
In 1960 the 11th General Conference formally named the International System of Units, SI. It has seven base units: the metre (length), kilogram (mass), second (time), ampere (electric current), kelvin (temperature), mole (amount of substance) and candela (luminous intensity). Units such as the newton, pascal, joule and watt are derived from them.
Definitions have since moved from physical objects to natural constants. The second has been tied to a transition of the caesium atom since 1967. The metre has been defined from the speed of light, 299,792,458 m/s, since 1983. Since 20 May 2019 the kilogram has been defined from the Planck constant, so the old platinum-iridium cylinder is no longer the definition.
Why it still matters on the plant floor
SI is coherent: 1 pascal is 1 newton per square metre, 1 watt is 1 joule per second, and a power in kW multiplied by hours gives kWh, with few extra conversion factors. Yet practice still mixes systems. A few values worth remembering:
- 1 bar = 100 kPa, and old gauges may read in kg/cm².
- 1 mechanical horsepower is about 745.7 W, while a metric horsepower is about 735.5 W.
- A US gallon is 3.785 litres and an imperial gallon is 4.546 litres.
- Pipe sizes are still often quoted in inches even when everything else is in millimetres.
Practical takeaways
- Write the unit next to every number on a quotation, drawing or datasheet.
- Convert once, at the start, and keep to SI through the whole calculation.
- Watch for horsepower versus kW, US versus imperial gallons, and bar versus kg/cm².
- Ask the supplier to state the unit basis whenever a figure is unclear.
To convert between units and check a figure, use the units converter.