Skip to content
Guides

A short history of the steam boiler

From the brewer's copper under Newcomen's engine to today's water-tube units: how boiler design changed, why pressures rose, and why inspection and codes followed.

By Site AdministratorUpdated 5 min read

Every sugar mill, rice parboiling plant, textile dye house and refinery that raises steam today is using a machine with more than three centuries of history behind it. The boiler is older than the railway, older than the electric motor and older than most of the standards that now govern it. Knowing how it got here makes the choices in a modern boiler quotation easier to understand.

Low-pressure beginnings

The first practical steam machines appeared in England around the start of the 18th century. Thomas Savery patented a steam pump for draining mines in 1698, and Thomas Newcomen built his atmospheric engine in 1712. Newcomen's boiler was little more than a brewer's copper: a riveted vessel of copper or iron sitting over a coal fire, producing steam only slightly above atmospheric pressure. The work was done not by steam pushing but by the atmosphere pressing on a piston after the steam beneath it was condensed.

James Watt improved the engine with his separate condenser, patented in 1769, and his partnership with Matthew Boulton from 1775 spread the steam engine through mines and mills. Watt's boilers, known as wagon boilers from their shape, still worked at very low pressure. Watt distrusted high-pressure steam and said so, and for a time his view held back the pressures that boilers were asked to carry.

High pressure and the internal furnace

Around 1800, Richard Trevithick in Cornwall and Oliver Evans in the United States built engines that used steam at several times atmospheric pressure. Higher pressure meant a smaller engine for the same power, which made steam locomotives and steamboats possible. It also demanded a stronger boiler.

Trevithick's answer, in use by around 1812, was the Cornish boiler: a long cylindrical shell with a single furnace tube running through the water. Because the fire sat inside the water space, the heating surface was larger and the shell was a simple cylinder that could carry pressure well. In 1844 William Fairbairn patented the Lancashire boiler, which used two furnace tubes side by side. Lancashire boilers served textile mills and factories for a century, and a few still exist.

Two other ideas from this period are still with us. Edward Green patented an economiser in the 1840s, a bank of tubes that used flue gas to preheat feedwater, which is why a modern boiler calculator asks for feedwater temperature. And the multi-tubular fire-tube boiler, which passes hot gas through many small tubes instead of one large flue, was proven on George Stephenson's Rocket in 1829 and became the standard for locomotives and later for ships, where it is known as the Scotch marine boiler.

Water-tube boilers and the rise of pressure

A fire-tube boiler keeps a large volume of water under pressure inside one shell, which limits how high the pressure can safely go. The alternative is to put the water inside the tubes and the fire outside them. Small-diameter tubes can carry much higher pressure than a large shell, and the stored energy is spread through many small parts rather than one big one.

George Babcock and Stephen Wilcox patented a water-tube boiler in 1867, and designs of this type grew with the electricity industry from the 1880s onward. By the 20th century, water-tube boilers with superheaters supplied steam at pressures and temperatures that no shell boiler could approach. Today the largest power-station units run above the critical point of water, about 221 bar, where there is no longer a distinction between liquid and vapour. Industrial plants, by contrast, mostly use package fire-tube boilers for pressures up to roughly 20 to 25 barg, and water-tube boilers above that or where very high steam output is needed.

Explosions, inspection and codes

The rise in pressure came at a price. Boiler explosions were common in the 19th century, on riverboats, in factories and in mines. The steamboat Sultana exploded on the Mississippi in 1865 with the loss of well over a thousand lives, and in 1905 a boiler explosion destroyed a shoe factory in Brockton, Massachusetts, killing dozens of workers. Each disaster pushed engineers and governments toward inspection and rules.

In Britain, the Manchester Steam Users' Association was formed in 1854, with Fairbairn among its founders, to inspect members' boilers and study failures. In the United States the Hartford Steam Boiler Inspection and Insurance Company began in 1866, and the American Society of Mechanical Engineers published its first Boiler Code in the mid-1910s. Modern pressure-equipment regulations in most countries descend from this work: material certificates, calculated shell thickness, safety valves, hydraulic tests and periodic inspection by an authorised person.

The unit called boiler horsepower also dates from this period. It was defined in the 1870s as the evaporation of 34.5 pounds of water per hour from and at 212 °F, which works out to about 33,475 Btu per hour or 9.81 kW. The phrase "from and at 100 °C" is still used to compare boilers on an equal basis, and it is the reason a boiler's rated output is often larger than the steam it delivers from cold feedwater at working pressure.

What the history means for a buyer today

  • Fire-tube or water-tube is still the first question. Fire-tube units are simpler, cheaper to maintain and tolerant of load swings; water-tube units handle higher pressure and output.
  • Pressure costs money. Specify the pressure the process needs at the point of use plus line losses, not a round number that sounds safe.
  • Feedwater temperature and condensate return have decided fuel bills since Green's economiser. Return as much condensate as you can.
  • Inspection is not optional. Boiler rules exist because of real accidents. Follow your local regulations and the manufacturer's manual for testing, safety valves and operator training.
  • Compare on the same basis. Ask whether a rating is "from and at 100 °C" or at the actual working conditions.

To turn a steam demand into boiler duty, horsepower, equivalent evaporation and fuel consumption, try the Steam and boiler duty calculator on MachineryCalc.

Keep reading